Masonry Shear Wall Design by ASD (Recording)
Item #: 2073SWP
Price: $105.00
Member Price: $105.00
Member Savings: $0.00
Format: Online Self-Paced
Duration: 1.72
$105.00
ASD Webinar: This webinar covers the design of masonry shear walls using the allowable stress design method. The webinar primarily focus on design of shear walls in accordance with the 2016 TMS 402 Code. Design methods for both a single layer of reinforcement and distributed reinforcement will be covered. Provisions for special reinforced masonry shear walls will also be discussed and the benefits and advantages of using this system are highlighted. Examples are include both planar and T-shaped walls. The shear friction provisions that were added in the 2016 TMS 402 code is covered.
SPEAKER:
Richard Bennett, Ph.D, P.E. is a Professor of Civil and Environmental Engineering at the University of Tennessee. He is a Fellow of The Masonry Society. He is a member of ASTM C12 on Mortars and Grouts for Unit Masonry, and ASTM C15 on Manufactured Masonry Units. Dr. Bennett has been very active in the Masonry Standards Joint Committee which writes the Building Code for Masonry Structures. He has chaired the Flexural, Axial Loads, and Shear subcommittee and served as the vice-chair of the 2013 MSJC Committee. Dr. Bennett was the chair of the main committee for the 2016 402/602 code. He is 2nd vice chair for the next code cycle, which will develop the 2022 provisions.
SPEAKER:
Richard Bennett, Ph.D, P.E. is a Professor of Civil and Environmental Engineering at the University of Tennessee. He is a Fellow of The Masonry Society. He is a member of ASTM C12 on Mortars and Grouts for Unit Masonry, and ASTM C15 on Manufactured Masonry Units. Dr. Bennett has been very active in the Masonry Standards Joint Committee which writes the Building Code for Masonry Structures. He has chaired the Flexural, Axial Loads, and Shear subcommittee and served as the vice-chair of the 2013 MSJC Committee. Dr. Bennett was the chair of the main committee for the 2016 402/602 code. He is 2nd vice chair for the next code cycle, which will develop the 2022 provisions.
Richard Bennett, Ph.D., P.E. is a professor of Civil and Environmental Engineering at the University of Tennessee, Knoxville. He has been heavily involved in the TMS 402/602 Building Code Requirements and Specifications of Masonry Structures. He was the main committee chair of the 2016 edition and is vice chair for the 2022 and 2028 edition. He is a co-author of Strength Design of Masonry and is the editor for the 2022 edition of the Masonry Designer’s Guide. He was recently named an Honorary Member of The Masonry Society.